Are you tired of weak WiFi signals and dead spots in your home? Do you want to boost your WiFi without spending a fortune on a new router or range extender? If so, then you're in luck! In this blog, we'll cover some easy DIY fixes for enhancing your WiFi extender signal.
1. Upgrade your WiFi Antennas:
One of the easiest and most effective ways to improve your WiFi signal is to upgrade your antennas. Most WiFi extenders come with standard antennas that are designed to provide adequate coverage for the average home. However, if you have a larger home or are experiencing weak signals in certain areas, upgrading your antennas can help.
There are two types of antennas: omni-directional and directional. Omni-directional antennas transmit signals in all directions, while directional antennas transmit signals in a specific direction. If you have dead spots in your home, you may want to consider a directional antenna to target the weak signal area.
2. Use a WiFi Booster:
A WiFi booster, also known as a WiFi amplifier or range extender, is a device that extends the range of your WiFi signal. It works by picking up your existing WiFi signal and then amplifying it, providing better coverage in areas where the signal is weak.
If you're experiencing slow internet speeds or a weak WiFi signal, a WiFi booster can help. They're easy to install and can be purchased for a relatively low cost. Just make sure to place the booster in a centralized location to ensure the best signal coverage.
3. Change the WiFi Channel:
If you live in a crowded neighborhood or apartment complex, you may be experiencing interference from other WiFi networks. Changing the WiFi channel can help to reduce interference and improve your signal strength.
To change your WiFi channel, access your router's settings and look for the WiFi channel option. Choose a channel that's not being used by other networks in your area. Channels 1, 6, and 11 are the most commonly used channels and tend to have the most interference. Try choosing a channel between these three channels for the best results.
4. Upgrade your WiFi Extender Firmware:
WiFi extenders come with firmware that controls how the device operates. Upgrading the firmware can improve the performance and stability of your WiFi extender.
To upgrade your WiFi extender firmware, connect the device to your computer using an Ethernet cable. Access the device's settings and look for the firmware upgrade option. Click upgrade and follow the on-screen instructions.
These are just a few DIY fixes you can try to enhance your WiFi extender signal. By upgrading your antennas, using a WiFi booster, changing the WiFi channel, and upgrading your firmware, you can enjoy better internet speeds and coverage in your home without breaking the bank.
Experience the difference with our Juiced QUADBooster that covers over 2,500 feet, has 4 adjustable external antennas, and an Ethernet port for a stable, strong connection. Its compact size, easy setup, and sleek design make it the perfect solution for both home and work.